Hey everyone, In this post I am going to be looking at ways to help keep your laptop cool and stop overheating. When a computer or laptop is running it produces heat. If this heat is not taken away the laptop will just get hotter and hotter until something either burns out or the laptop shuts down to protect it self. Running a computer/laptop that keeps shutting down doesn't mean that it isn't damaging it.
Overheating a laptop often will shorten the lifespan and damaged components costing you in the long run. Follow these simple steps to keep your laptop cooler and running for longer. There are many products out there to help keep your laptop cool as well so there is no reason to have one that is overheating.
1) Check if the fans are working
The first thing to check when trying to keep your laptop cool is to see if the fans are working correctly. You can do this by running the laptop. It you hear the fans starting to spin up then they are working.
2) Check to see that there is sufficient air flow from the heatsink
If you can hear the fans spinning up loads and sounding very loud this should be accompanied with a warm air flow from the exhaust vent on the laptop. If there doesn't feel to be much air flow from the vent this means that the laptop is most likely clogged with dust. You can fix this by turning the laptop off and then blowing into the exhaust vent in short sharp bursts which will dislodge any excess dust or dirt on the coolers.
3) Make sure that their is a good air gap all round the laptop
Believe it or not laptops down work very well on your lap. They have air vents on the bottom that are covered when you are working with them on your legs which increases the chance of the laptop overheating. You can solve this problem by simply sitting with the laptop on a table or if you need it on your lap but a decent sized hardback book between you and the laptop. This will give the laptop room to breath and air airflow which will help to cool it.
4) If you are running demanding programs get a laptop cooling pad
You can get laptop cooling pads from almost any online computer shops or shops. These cooling pads generally have extra fans on them which will then blow onto the bottom of the laptop cooling it from below. These usually connect to the USB sockets on your laptop which will then power the extra cooling fans. There are many types that are all different sizes you will need to look for one that is a bit wider and longer than your laptop so it doesn't hang over the edge.
Thanks for reading. I hope that after following these simple tips you will have a cool and long lasting laptop.
Related Articles;
Welcome to Jack-O-Bytes Reviews. This website reviews hardware and software available for computers. I also write step by step guides for hardware and software related tasks.
Showing posts with label Cooling. Show all posts
Showing posts with label Cooling. Show all posts
Sunday, 17 July 2011
Saturday, 16 July 2011
How to keep your PC running cool and quiet - Case Fans and Cases
Hey everyone. In this post I am going to be looking at ways to help keep your PC running cool and Quiet. When A computer is being used it produces heat because of the chips that are in it. Each one is made up of loads of little transistors and as they are turned on and of they give out small amounts of heat. Now when all of this is added up you can end up with some pretty high heat output components that need to be cooled. This is my quick guide to cooling your computer on a budget.
Firstly The Case
One of the main parts of a computer for cooling is the case that you house the components in. There are many people out there running their high powered computers in a tiny little case which causes them to get too hot or become noisy as the fans spin up to try and keep them cool. Here are a few cases that will not brake the bank but will help to keep the air flow to your components as good as possible.
I am going to start with the Casecom 5288. It can be bought for £28 ($45) from here Having looked at the specs of the casecom 5288 the first thing I noticed was the big 120mm fan on the front and the space available for a 120mm fan on the back as well. 120/140mm fans are a lot better at keeping down the volume of the PC as they don't have to spin as fast to move as much air as 80/92mm fans do. This case also feautres a 120/140mm fan space at the top of the case and the PSU is also mounted at the bottom. This means that the PSU gets good cool air to keep it running well and help keep voltages stable. It is also quite a stylish case and looks rather nice.
The next case that I am going to look at is another Casecom case. You can find it here. It is the Casecom 6788. This massive looking case costs around £29 ($47) has a full vented front so that air can pass through the 5.25" drive bay covers through a fine mesh and filter. This stops dust getting in while allowing air to pass through. It has basically the same layout as the Casecom 5288 except different styling. This is more of a gaming case. It has the slot for a 120mm fan in the front and upto 120mm on the back and a space for upto 140mm on the top. This is great for case airflow and will help keep the components very cool. The PSU is also mounted at the bottom like the 5288 which is good for keeping the PSU cool as well.
My final case is made by Xigmatek and goes by the name Xigmatek Asgard. This all black case is made to a high standard and only costs £29 ($47) from here. It has a front mounted 120mm fan from standard and space on the back for another 120mm fan. It also has two spaces for 120mm fans on the side to aid graphics card cooling. The PSU is mounted at the top in this case unlike the Casecom cases which might mean that your PSU will run a little hotter but it most likely won't make that much difference so long as you have good case fans.
Secondly The Case Fans
Having a good case can easily be canceled out by having cheap high spinning fans that produce a lot of noise. Instead of going for the cheapest fans you can find it is usually a good idea to stick with well known brands such as Zalman, Coolermaster, and Antec.
I am going to start with the Coolermaster Excalibur. This is one of the most expensive PC fans you can buy at the moment but it does offer amazing performance and it will also last a lot longer than most cheap PC fans. Here are the main specifications for the Coolermaster Excalibur
The next type of fan I am going to look at is the Coolermaster 120mm Sickleflow. This is a very good case fan and these are the specs about it;
Firstly The Case
One of the main parts of a computer for cooling is the case that you house the components in. There are many people out there running their high powered computers in a tiny little case which causes them to get too hot or become noisy as the fans spin up to try and keep them cool. Here are a few cases that will not brake the bank but will help to keep the air flow to your components as good as possible.
I am going to start with the Casecom 5288. It can be bought for £28 ($45) from here Having looked at the specs of the casecom 5288 the first thing I noticed was the big 120mm fan on the front and the space available for a 120mm fan on the back as well. 120/140mm fans are a lot better at keeping down the volume of the PC as they don't have to spin as fast to move as much air as 80/92mm fans do. This case also feautres a 120/140mm fan space at the top of the case and the PSU is also mounted at the bottom. This means that the PSU gets good cool air to keep it running well and help keep voltages stable. It is also quite a stylish case and looks rather nice.
![]() |
| Casecom 5288 |
![]() |
| Casecom 6788 |
Secondly The Case Fans
Having a good case can easily be canceled out by having cheap high spinning fans that produce a lot of noise. Instead of going for the cheapest fans you can find it is usually a good idea to stick with well known brands such as Zalman, Coolermaster, and Antec.
I am going to start with the Coolermaster Excalibur. This is one of the most expensive PC fans you can buy at the moment but it does offer amazing performance and it will also last a lot longer than most cheap PC fans. Here are the main specifications for the Coolermaster Excalibur
- Speed (R.P.M.) 600 - 2000 RPM ± 10%
- Air Flow (CFM) 26.4 - 85.6 CFM ± 10%
- Air pressure (mmH2O) 0.75 - 3.53 mmH2O
- Noise 13 - 30 dBA
The next type of fan I am going to look at is the Coolermaster 120mm Sickleflow. This is a very good case fan and these are the specs about it;
- Speed (R.P.M.) 2000 R.P.M.
- Air Flow (CFM) 69.69 CFM
- Air pressure (mmH2O) 2.94 mmH2O
- Fan Noise Level (dB-A) 19 dB-A
![]() |
| Coolermaster Sickleflow 120mm |
The final fan that I am going to look at is the Xilence Red Wing. This fan is a great fan and I have personally been running one for quite a while now and it is very quiet. They cost around £4.50 ($7) and they are very good for the price. They come with a fitting kit which includes 4 rubber mounts for the fan to stop vibrations. These are the specifications for the fan
- Air volume at full speed (12V), CFM ±10% 44.71
- Noise level at full speed (12V), dB(A) 21.2
- Fan speed at full speed (12V), RPM ±10% 1400
![]() |
| Xilence Red Wing 120mm |
Labels:
120mm,
5288,
6788,
Case,
Casecom,
Cool,
Coolermaster,
Cooling,
Fan,
Fans,
Quiet,
Red Wing,
Review,
Sickleflow,
Xilence
Subscribe to:
Posts (Atom)




